ZyXEL Communications PLA-402 v3, Руководство пользователя

Страница: 44 / 94

Chapter 5 The Configuration Utility
PLA-402 v3 User’s Guide
44
The following table describes the labels in this screen.
5.7 About Screen
Use the About screen to view information regarding the configuration utility and
firmware version of the PLA-402 v3 you are connected to. Click the icon in
the top right corner of the utility to view the About screen.
Figure 20 About Screen
Table 6 Advanced Screen
LABEL DESCRIPTION
Adapter This field identifies which powerline coaxial network information is
displayed. Different powerline coaxial networks are identified by the
Ethernet interface (network card) on your computer which is connected
directly to a coaxial adapter. Typically there is only one connection.
However, if your computer has two network cards and both are connected
to a coaxial adapter, then you have two powerline coaxial networks.
Site This field displays:
• Local , if it is the PLA-402 v3 directly connected to the computer
running the configuration utility.
• Remote , if it is a coaxial adapter in your powerline coaxial network but
not directly connected to the computer running the configuration utility.
MAC
Address This is a read-only field which shows the MAC address of the coaxial
adapter you are configuring. You can find the MAC address of your PLA-
402 v3 displayed on a sticker on the bottom of your device.
Priority Select a priority setting from the drop-down box for traffic FROM your
selected device. The options, in order of importance, are
High , Medium ,
Normal and Low .
Save Click this to apply your changes. The new Priority setting is applied to the
selected coaxial adapter.
Upgrade to
latest version
firmware and
utility.