ZyXEL Communications PLA-402 v3, Руководство пользователя, Страница: 37 / 94

Chapter 5 The Configuration Utility
PLA-402 v3 User’s Guide
37
5.3 Configuration Screen
Use the Configuration screen to see which devices are recognized by your
powerline coaxial network, to configure your PLA-402 v3 and to set up a secure
powerline coaxial network by changing the powerline coaxial network name. This
screen opens up when you launch the utility.
Note: Use the icon to view online help information in each screen of the utility .
Figure 15 Configuration Screen
The following table describes the labels in this screen.
Table 3 Configuration Screen
LABEL DESCRIPTION
Network
Topology Use this to select which powerline coaxial network information is
displayed. Different powerline coaxial networks are identified by the
Ethernet interface (network card) connected directly to the PLA-402 v3.
Typically there is only one connection, however, if your computer has two
network cards and both are connected to a coaxial device then you have
two powerline coaxial networks.
The fields described below are used to identify the coaxial adapters recognized on the
powerline coaxial network. The configuration utility automatically updates this information
every 10 seconds. Click
Scan to refresh the information in these fields (immediately).
Note: Only devices which share the same network name are displayed in this table.