ZyXEL Communications P8802T, Руководство пользователя

Страница: 72 / 278

Chapter 3 Device Info Screens
Basic Home Station VDSL2 P8802T User’s Guide
72
Figure 11
Route Info Screen
Each field is described in the following table.
3.10 The ARP Info Screen
Log into the VDSL Router’s web configurator and click Device Info > ARP to display Address
Resolution Protocol information. This screen lists the IP addresses the VDSL Router has mapped to
MAC addresses.
Figure 12
ARP Info Screen
Each field is described in the following table.
Table 9
Route Info Screen
LABEL DESCRIPTION
Destination This displays the IP address to which this entry applies.
Gateway This displays the gateway the VDSL Router uses to send traffic to the entry’s destination
address.
Subnet Mask This displays the subnet mask of the destination net.
Flag This displays whether the route is up (U), the VDSL Router drops packets for this
destination (!), the route uses a gateway (G), the target is a host (H), reinstate route for
dynamic routing (R), the route was dynamically installed by redirect (D), or modified from
redirect (M).
Metric The metric represents the “cost” of transmission for routing purposes. IP routing uses hop
count as the measurement of cost, with a minimum of 1 for directly-connected networks.
Service The name of a specific service to which the route applies if one is specified.
Interface The interface through which this route sends traffic.
Table 10
ARP Info Screen
LABEL DESCRIPTION
IP address The learned IP address of a device connected to one of the system’s ports.
Flags Static - static entry, Dynamic - dynamic entry that is not yet complete, Complete -
dynamic entry that is complete.
HW Address The MAC address of the device with the listed IP address.
Device The interface through which the VDSL Router sends traffic to the device listed in the entry.