ZyXEL Communications P-873HNU-51B, Руководство пользователя

Страница: 92 / 339

Chapter 7 Wireless
P-873HNU(P)-51B User’s Guide
92
The following table describes the labels in this screen.
7.5 The WPS Screen
Use this screen to configure WiFi Protected Setup (WPS) on your VDSL Router.
WPS allows you to quickly set up a wireless network with strong security, without having to
configure security settings manually. Set up each WPS connection between two devices. Both
devices must support WPS. See
Section 7.7.8.3 on page 103 for more information about WPS.
Note: The VDSL Router applies the security settings of the SSID1 profile (see Section 7.2
on page 82 ). If you want to use the WPS feature, make sure you have set the
security mode of SSID1 to WPA-PSK, WPA2-PSK or No Security.
Click Network Settings > Wireless > WPS. The following screen displays. Select Enable and
click Apply to activate the WPS function. Then you can configure the WPS settings in this screen.
Table 18
Wireless > MAC Authentication
LABEL DESCRIPTION
SSID Select the SSID for which you want to configure MAC filter settings.
MAC List Define the filter action for the list of MAC addresses in the MAC Address table.
Select Disable to turn off MAC filtering.
Select Allow to permit access to the VDSL Router. MAC addresses not listed will be
denied access to the VDSL Router.
Select Deny to block access to the VDSL Router. MAC addresses not listed will be
allowed to access the VDSL Router.
Add new
MAC address Click this if you want to add a new MAC address entry to the MAC filter list below.
Enter the MAC addresses of the wireless devices that are allowed or denied access to
the VDSL Router in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
# This is the index number of the entry.
MAC Address This is the MAC addresses of the wireless devices that are allowed or denied access to
the VDSL Router.
Modify Click the Delete icon to delete the entry.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.