ZyXEL Communications P-873HNU-51B, Руководство пользователя

Страница: 138 / 339

Chapter 10 Quality of Service (QoS)
P-873HNU(P)-51B User’s Guide
138
10.4.1 Adding a QoS Queue
Click Add new Queue or the edit icon in the Queue Setup screen to configure a queue.
Figure 53
Queue Setup: Add
The following table describes the labels in this screen.
Rate Limit This shows the maximum transmission rate allowed for traffic on this queue.
Modify Click the Edit icon to edit the queue.
Click the Delete icon to delete an existing queue. Note that subsequent rules move
up by one when you take this action.
Table 34
Network Settings > QoS > Queue Setup (continued)
LABEL DESCRIPTION
Table 35
Queue Setup: Add
LABEL DESCRIPTION
Active Select to enable or disable this queue.
Name Enter the descriptive name of this queue.
To Interface Select the interface to which this queue is applied.
This field is read-only if you are editing the queue.
Priority Select the priority level (from 1 to 3) of this queue.
The smaller the number, the higher the priority level. Traffic assigned to higher
priority queues gets through faster while traffic in lower priority queues is dropped
if the network is congested.
Weight Select the weight (from 1 to 8) of this queue.
If two queues have the same priority level, the VDSL Router divides the bandwidth
across the queues according to their weights. Queues with larger weights get more
bandwidth than queues with smaller weights.
Buffer
Management This field displays Drop Tail (DT). Drop Tail (DT) is a simple queue management
algorithm that allows the VDSL Router buffer to accept as many packets as it can
until it is full. Once the buffer is full, new packets that arrive are dropped until there
is space in the buffer again (packets are transmitted out of it).
Rate Limit Specify the maximum transmission rate (in Kbps) allowed for traffic on this queue.