ZyXEL Communications P-861H-G1 Скачать руководство пользователя страница 319

Страница: 319 / 341

Prestige 861H Series User’s Guide

Appendix H Log Descriptions

318

Table 116

UPnP Logs

LOG MESSAGE

DESCRIPTION

UPnP pass through Firewall

UPnP packets can pass through the firewall.

ppp:LCP Closing

The PPP connection’s Link Control Protocol stage is closing.

ppp:IPCP Closing

The PPP connection’s Internet Protocol Control Protocol stage is closing.

Table 117

Content Filtering Logs

LOG MESSAGE

DESCRIPTION

%s: Keyword blocking

The content of a requested web page matched a user defined keyword.

%s: Not in trusted web
list

The web site is not in a trusted domain, and the router blocks all traffic

except trusted domain sites.

%s: Forbidden Web site

The web site is in the forbidden web site list.

%s: Contains ActiveX

The web site contains ActiveX.

%s: Contains Java
applet

The web site contains a Java applet.

%s: Contains cookie

The web site contains a cookie.

%s: Proxy mode
detected

The router detected proxy mode in the packet.

The content filter server responded that the web site is in the blocked

category list, but it did not return the category type.

%s:%s

The content filter server responded that the web site is in the blocked

category list, and returned the category type.

%s(cache hit)

The system detected that the web site is in the blocked list from the

local cache, but does not know the category type.

%s:%s(cache hit)

The system detected that the web site is in blocked list from the local

cache, and knows the category type.

%s: Trusted Web site

The web site is in a trusted domain.

When the content filter is not on according to the time schedule or you

didn't select the "Block Matched Web Site” check box, the system

forwards the web content.

Waiting content filter
server timeout

The external content filtering server did not respond within the timeout

period.

DNS resolving failed

The Prestige cannot get the IP address of the external content filtering

via DNS query.

Creating socket failed

The Prestige cannot issue a query because TCP/IP socket creation

failed, port:port number.

Table 115

PPP Logs (continued)

LOG MESSAGE

DESCRIPTION

Содержание P-861H-G1






















































































































































































































































































































































Результаты поиска

Содержание P-861H-G1

Отзывы:

ZyXEL Communications P-861H-G1, Руководство пользователя, Страница: 319 / 341

Результаты поиска

Содержание P-861H-G1

Отзывы: