ZyXEL Communications P-861H-G1 Скачать руководство пользователя страница 231

Страница: 231 / 341

Prestige 861H Series User’s Guide

Chapter 25 System Maintenance

230

Figure 157

Menu 24.10 System Maintenance: Time and Date Setting

Menu 24.10 - System Maintenance - Time and Date Setting

Use Time Server when Bootup= None
Time Server Address= N/A

Current Time: 22 : 18 : 04
New Time (hh:mm:ss): 22 : 18 : 01

Current Date: 2000 - 01 - 01
New Date (yyyy-mm-dd): 2000 - 01 - 01

Time Zone= GMT

   Daylight Saving= No
   Start Date (mm-dd):             01 - 00
   End Date (mm-dd):               01 - 00

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

Table 70

Menu 24.10 System Maintenance: Time and Date Setting

FIELD

DESCRIPTION

Use Time Server

when Bootup

Enter the time service protocol that your time server sends when you turn on

the Prestige. Not all time servers support all protocols, so you may have to

check with your ISP/network administrator or use trial and error to find a

protocol that works. The main differences between them are the format.

Daytime (RFC 867)

format is day/month/year/time zone of the server.

Time (RFC-868)

format displays a 4-byte integer giving the total number of

seconds since 1970/1/1 at 0:0:0.

NTP (RFC-1305)

is similar to

Time (RFC-868)

None

. The default, enter the time manually.

Time Server Address

Enter the IP address or domain name of your time server. Check with your ISP/

network administrator if you are unsure of this information.

Current Time

This field displays an updated time only when you reenter this menu.

New Time

Enter the new time in hour, minute and second format.

Current Date

This field displays an updated date only when you re-enter this menu.

New Date

Enter the new date in year, month and day format.

Time Zone

Press [SPACE BAR] and then [ENTER] to set the time difference between your

time zone and Greenwich Mean Time (GMT).

Daylight Saving

If you use daylight savings time, then choose

Yes

Start Date

If using daylight savings time, enter the month and day that it starts on.

End Date

If using daylight savings time, enter the month and day that it ends on

When you have completed this menu, press [ENTER] at the prompt “

Press ENTER to Confirm

or ESC to Cancel:

” to save your configuration, or press [ESC] at any time to cancel.

Содержание P-861H-G1






















































































































































































































































































































































Результаты поиска

Содержание P-861H-G1

Отзывы:

ZyXEL Communications P-861H-G1, Руководство пользователя, Страница: 231 / 341

Результаты поиска

Содержание P-861H-G1

Отзывы: