ZyXEL Communications P-861H-G1, Руководство пользователя, Страница: 153 / 341

Prestige 861H Series User’s Guide
Chapter 16 Internet Access 152
Figure 81 Menu 4 Internet Access Setup
Menu 4 - Internet Access Setup
ISP's Name= MyISP
Encapsulation= ENET ENCAP
Multiplexing= LLC-based
VPI #= 8
VCI #= 35
Service Name= N/A
My Login= N/A
My Password= N/A
NAT= Full Feature
Address Mapping Set= 1
IP Address Assignment= Dynamic
IP Address= N/A
ENET ENCAP Gateway= N/A
Press ENTER to Confirm or ESC to Cancel:
The following table contains instructions on how to configure your Prestige for Internet
access.
Table 44
Menu 4 Internet Access Setup
FIELD DESCRIPTION
ISP’s Name Enter the name of your Internet Service Provider (ISP). This information is for
identification purposes only.
Encapsulation Press [
SPACE BAR
] to select the method of encapsulation used by your ISP.
Choices are PPPoE , PPPoA , RFC 1483 or ENET ENCAP .
Multiplexing This field displays the method of multiplexing used by your ISP.
VPI # Enter the Virtual Path Identifier (VPI) assigned to you.
VCI # Enter the Virtual Channel Identifier (VCI) assigned to you.
Service Name Type a Service Name for PPPoE encapsulation only.
My Login Configure the My Login and My Password fields for PPPoA and PPPoE
encapsulation only. Enter the login name that your ISP gives you. If you are using
PPPoE encapsulation , then this field must be of the form user@domain where
domain identifies your PPPoE service name.
My Password Enter the password associated with the login name above.
Network Address
Translation
Press [
SPACE BAR
] to select None , SUA Only or Full Feature . Please see the
NAT chapter for more details on the SUA (Single User Account) feature.
Address Mapping
Set
Type the numbers of mapping sets (1-8) to use with NAT.
IP Address
Assignment
Press [
SPACE BAR
] to select Static or Dynamic address assignment.
IP Address Enter the IP address supplied by your ISP if applicable.