ZyXEL Communications P-660W-T1 v2, Руководство пользователя

Страница: 75 / 244

Chapter 6 Wireless LAN
P-660W-Tx v2 User’s Guide
75
"
At the time of writing, WDS is compatible with other ZyXEL APs only. Not all
models support WDS links. Check your other AP’s documentation.
Figure 28 Wireless LAN > WDS
The following table describes the labels in this screen.
Table 22 Wireless LAN > WDS
LABEL DESCRIPTION
Enable WDS
Security
Select this to set up security on your ZyXEL Device’s bridged connection with an
AP. Select AES (Advanced Encryption Standard) as your security method if the
AP’s on your network support it. Otherwise select TKIP Security (ZyAIR Series
Compatible) (Temporal Key Integrity Protocol).
If you clear this option, the data sent between APs is not encrypted. Anyone can
read it.
# This is the index number of the access point (AP) with which you are setting up a
WDS connection.
Active Select this to enable a WDS connection with this AP.
Remote Bridge
MAC Address
Type the MAC address of the AP with which you are setting up a WDS connection
in a valid MAC address format (six hexadecimal character pairs, for example
12:34:56:78:9a:bc).
PSK Type a PSK (Pre-Shared Key) in this field from 8~63 characters long (A~Z,
a~z,0~9).
Back Click Back to return to the Wireless LAN menu screen.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to cancel your changes.