ZyXEL Communications P-660RU-T1 v3, Руководство пользователя, Страница: 103 / 230

Chapter 11 Quality of Service (QoS)
P-660RU-Tx v3 User’s Guide
103
11.2.1 The QoS Settings Summary Screen
Use this screen to display a summary of rules and actions configured for the ZyXEL Device.
In the
Advanced > QoS screen, click the QoS Settings Summary button to open the
following screen.
Figure 42 Advanced Setup > QoS > QoS Settings Summary
The following table describes the labels in this screen.
DSCP
Remarking
Specify a DSCP number between 0 and 63 to re-assign the priority level to matched
traffic.
802.1p
Remarking
Select a priority level (0 to 7) to re-assign the priority level to matched traffic.
Queue # Specify a Low , Medium , High or Highest queue tag to matched traffic. Traffic
assigned to a higher queue gets through faster while traffic in lower queues is
dropped when there is network congestion.
ADD Click this to add the rule.
DELETE Click this to remove the rule.
CANCEL Click this to restore previously saved settings.
Table 27 Advanced Setup > QoS
LABEL DESCRIPTION
Table 28 Advanced Setup > QoS > QoS Settings Summary
LABEL DESCRIPTION
Rules
# This is the rule’s index number.
Active This shows whether the rule is enabled or disabled.
Physical Ports This is the physical port associated with the rule.
Destination MAC
and IP/Mask Port
Ranges
This is the port range for destination MAC address and IP address.
Source MAC and
IP/Mask Port
Ranges
This is the port range for source MAC address and IP address.
Protocol ID This is the protocol ID associated with the rule.
VLAN ID This is the VLAN ID associated with the rule.
IPP/TOS (DSCP) This shows the IPP/TOS or DSCP settings.