ZyXEL Communications P-660R-F1 series, Руководство пользователя

Страница: 58 / 268

Chapter 4 WAN Setup
P-660R-F1 Series User’s Guide
58
4.7 Traffic Redirect
Traffic redirect forwards traffic to a backup gateway when the ZyXEL Device cannot connect to the
Internet. An example is shown in the figure below.
Figure 29
Traffic Redirect Example
Sustain Cell Rate The Sustain Cell Rate (SCR) sets the average cell rate (long-term) that can be
transmitted. Type the SCR, which must be less than the PCR. Note that system
default is 0 cells/sec.
Maximum Burst
Size Maximum Burst Size (MBS) refers to the maximum number of cells that can be
sent at the peak rate. Type the MBS, which is less than 65535.
Packet Filter
Incoming Filter
Sets
Protocol Filter Select the protocol filter(s) to control incoming traffic. You may choose up to 4
sets of filters.
You can configure packet filters in the Packet Filter screen.
Generic Filter Select the generic filter(s) to control outgoing traffic. You may choose up to 4 sets
of filters.
You can configure generic filters in the Packet Filter screen.
Outgoing Filter
Sets
Protocol Filter Select the protocol filter(s) to control outgoing traffic. You may choose up to 4
sets of filters.
You can configure protocol filters in the Packet Filter screen.
Generic Filter Select the generic filter(s) to control outgoing traffic. You may choose up to 4 sets
of filters.
You can configure generic filters in the Packet Filter screen.
Back Click Back to return to the previous screen.
Apply Click Apply to save the changes.
Cancel Click Cancel to begin configuring this screen afresh.
Table 16
More Connections Advanced Setup (continued)
LABEL DESCRIPTION