ZyXEL Communications P-660HWP-D1, Руководство пользователя

Страница: 109 / 374

Chapter 7 Wireless LAN
P-660HWP-D1 User’s Guide
109
"
If you do not enable any wireless security on your P-660HWP-D1, your network
is accessible to any wireless networking device that is within range.
Figure 57 Wireless: No Security
The following table describes the labels in this screen.
7.4.2 WEP Encryption
WEP encryption scrambles the data transmitted between the wireless clients and the access
points to keep network communications private. It encrypts unicast and multicast
communications in a network. Both the wireless clients and the access points must use the
same WEP key.
Your P-660HWP-D1 allows you to configure up to four 64-bit, 128-bit or 256-bit WEP keys
but only one key can be enabled at any one time.
In order to configure and enable WEP encryption; click
Network > Wireless LAN to display
the General screen. Select Static WEP from the Security Mode list.
Table 33 Wireless No Security
LABEL DESCRIPTION
Security Mode Choose No Security from the drop-down list box.
Apply Click Apply to save your changes to the P-660HWP-D1.
Cancel Click Cancel to reload the previous configuration for this screen.
Advanced
Setup
Click Advanced Setup to display the Wireless Advanced Setup screen and edit
more details of your WLAN setup.