ZyXEL Communications P-660HN-F1, Руководство пользователя

Страница: 216 / 366

Chapter 16 VPN
ADSL Series User’s Guide
216
16.6.5 IKE Phases
There are two phases to every IKE (Internet Key Exchange) negotiation – phase 1 (Authentication)
and phase 2 (Key Exchange). A phase 1 exchange establishes an IKE SA and the second one uses
that SA to negotiate SAs for IPSec.
Figure 113
Two Phases to Set Up the IPSec SA
In phase 1 you must:
• Choose a negotiation mode.
• Authenticate the connection by entering a pre-shared key.
• Choose an encryption algorithm.
• Choose an authentication algorithm.
• Choose a Diffie-Hellman public-key cryptography key group (DH1 or DH2).
• Set the IKE SA lifetime. This field allows you to determine how long an IKE SA should stay up
before it times out. An IKE SA times out when the IKE SA lifetime period expires. If an IKE SA
times out when an IPSec SA is already established, the IPSec SA stays connected.
In phase 2 you must:
• Choose which protocol to use (ESP or AH) for the IKE key exchange.
• Choose an encryption algorithm.
• Choose an authentication algorithm
• Choose whether to enable Perfect Forward Secrecy (PFS) using Diffie-Hellman public-key
cryptography – see Appendix D on page 311 . Select None (the default) to disable PFS.
• Choose Tunnel mode or Transport mode.
• Set the IPSec SA lifetime. This field allows you to determine how long the IPSec SA should stay
up before it times out. The ZyXEL Device automatically renegotiates the IPSec SA if there is
traffic when the IPSec SA lifetime period expires. The ZyXEL Device also automatically
renegotiates the IPSec SA if both IPSec routers have keep alive enabled, even if there is no
traffic. If an IPSec SA times out, then the IPSec router must renegotiate the SA the next time
someone attempts to send traffic.