manualshive.com logo in svg

ZyXEL Communications P-660H Series, Руководство пользователя, Страница: 68 / 466

Поделиться
Скачать
ZyXEL Communications P-660H Series Скачать руководство пользователя страница 68

P-660H/HW-T Series User’ Guide

67

Chapter 4 LAN Setup

Figure 17   

Any IP Example

The Any IP feature does not apply to a computer using either a dynamic IP address or a static 
IP address that is in the same subnet as the Prestige’s IP address.

Note: 

You 

must 

enable NAT/SUA to use the Any IP feature on the Prestige. 

4.2.4.1  How Any IP Works

Address Resolution Protocol (ARP) is a protocol for mapping an Internet Protocol address (IP 
address) to a physical machine address, also known as a Media Access Control or MAC 
address, on the local area network. IP routing table is defined on IP Ethernet devices (the 
Prestige) to decide which hop to use,

 

to help forward data along to its specified destination.

The following lists out the steps taken, when a computer tries to access the Internet for the first 
time through the Prestige.

1

When a computer (which is in a different subnet) first attempts to access the Internet, it 
sends packets to its default gateway (which is not the Prestige) by looking at the MAC 
address in its ARP table. 

2

When the computer cannot locate the default gateway, an ARP request is broadcast on the 
LAN. 

3

The Prestige receives the ARP request and replies to the computer with its own MAC 
address. 

4

The computer updates the MAC address for the default gateway to the ARP table. Once 
the ARP table is updated, the computer is able to access the Internet through the Prestige. 

5

When the Prestige receives packets from the computer, it creates an entry in the IP 
routing table so it can properly forward packets intended for the computer. 

After all the routing information is updated, the computer can access the Prestige and the 
Internet as if it is in the same subnet as the Prestige. 

Содержание P-660H Series



















































































































































































































































































































































































































































































Отзывы:

Нет отзывов