manualshive.com logo in svg

ZyXEL Communications P-660H Series, Руководство пользователя, Страница: 310 / 466

Поделиться
Скачать
ZyXEL Communications P-660H Series Скачать руководство пользователя страница 310

P-660H/HW-T Series User’ Guide

309

Chapter 33 Firmware and Configuration File Maintenance

Figure 199   

FTP Session Example

33.2.4  GUI-based FTP Clients

The following table describes some of the commands that you may see in GUI-based FTP 
clients.

33.2.5  TFTP and FTP over WAN Management Limitations

TFTP, FTP and Telnet over WAN will not work when:

• You have disabled Telnet service in menu 24.11.
• You have applied a filter in menu 3.1 (LAN) or in menu 11.5 (WAN) to block Telnet 

service.

• The IP address in the 

Secured Client IP 

field in menu 24.11 does not match the client IP. 

If it does not match, the Prestige will disconnect the Telnet session immediately.

• You have an SMT console session running.

331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> get rom-0 zyxel.rom
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec.
ftp> quit

Table 110   

General Commands for GUI-based FTP Clients

COMMAND

DESCRIPTION

Host Address

Enter the address of the host server.

Login Type

Anonymous.
This is when a user I.D. and password is automatically supplied to the 

server for anonymous access.  Anonymous logins will work only if your ISP 

or service administrator has enabled this option.
Normal.  
The server requires a unique User ID and Password to login.

Transfer Type

Transfer files in either ASCII (plain text format) or in binary mode.

Initial Remote Directory

Specify the default remote directory (path).

Initial Local Directory

Specify the default local directory (path).

Содержание P-660H Series



















































































































































































































































































































































































































































































Отзывы:

Нет отзывов