manualshive.com logo in svg

ZyXEL Communications P-660H Series, Руководство пользователя, Страница: 298 / 466

Поделиться
Скачать
ZyXEL Communications P-660H Series Скачать руководство пользователя страница 298

P-660H/HW-T Series User’ Guide

297

Chapter 32 System Information and Diagnosis

The following table describes the fields present in 

Menu 24.1 —

 

System Maintenance —

 

Status

 which are read-only and meant for diagnostic purposes.

Figure 189   

Menu 24.1 System Maintenance : Status

The following table describes the fields present in 

Menu 24.1 —

 

System Maintenance —

 

Status

.

                     Menu 24.1 - System Maintenance - Status           23:08:47
                                                             Sat. Jan. 01, 2000

Node-Lnk Status      TxPkts      RxPkts      Errors  Tx B/s  Rx B/s     Up 
Time
 1-ENET  N/A              0           0           0       0       0     0:00:00
 2       N/A              0           0           0       0       0     0:00:00
 3       N/A              0           0           0       0       0     0:00:00
 4       N/A              0           0           0       0       0     0:00:00
 5       N/A              0           0           0       0       0     0:00:00
 6       N/A              0           0           0       0       0     0:00:00
 7       N/A              0           0           0       0       0     0:00:00
 8       N/A              0           0           0       0       0     0:00:00

My WAN IP (from ISP): 0.0.0.0

    Ethernet:                                    WAN:
      Status: 100M/Full Duplex Tx Pkts: 5731       Line Status: Down
      Collisions: 0            Rx Pkts: 8314       Upstream Speed:     0 kbps
    CPU Load =   25.52%                            Downstream Speed:     0 kbps
                                 Press Command:
               COMMANDS: 1-Reset Counters  TAB-Next Page  ESC-Exit

Table 105   

Menu 24.1 System Maintenance: Status

FIELD

DESCRIPTION

Node-Lnk

This is the node index number and link type. Link types are: PPP, ENET, 1483.

Status

This shows the status of the remote node.

TxPkts

The number of transmitted packets to this remote node.

RxPkts

The number of received packets from this remote node.

Errors

The number of error packets on this connection.

Tx B/s

This shows the transmission rate in bytes per second.

Rx B/s

This shows the receiving rate in bytes per second.

Up Time

This is the time this channel has been connected to the current remote node.

My WAN IP 

(from ISP)

This is the IP address of the ISP remote node.

Ethernet

This shows statistics for the LAN.

   Status

This shows the current status of the LAN.

   Tx Pkts

This is the number of transmitted packets to the LAN.

   Rx Pkts

This is the number of received packets from the LAN.

Содержание P-660H Series



















































































































































































































































































































































































































































































Отзывы:

Нет отзывов