manualshive.com logo in svg

ZyXEL Communications P-660H Series, Руководство пользователя, Страница: 201 / 466

Поделиться
Скачать
ZyXEL Communications P-660H Series Скачать руководство пользователя страница 201

P-660H/HW-T Series User’ Guide

Chapter 17 Maintenance

200

17.3  DHCP Table Screen 

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual 
clients to obtain TCP/IP configuration at start-up from a server. You can configure the Prestige 
as a DHCP server or disable it. When configured as a server, the Prestige provides the TCP/IP 
configuration for the clients. If set to 

None

, DHCP service will be disabled and you must have 

another DHCP server on your LAN, or else the computer must be manually configured.

Click 

Maintenance

, and then the 

DHCP Table

 tab. Read-only information here relates to 

your DHCP status. The DHCP table shows current DHCP Client information (including 

IP 

Address

, 

Host

 

Name

 and 

MAC Address

) of all network clients using the DHCP server.

Figure 101   

DHCP Table

The following table describes the fields in this screen.  

Poll Interval(s)

Type the time interval for the browser to refresh system statistics.

Set Interval

Click this button to apply the new poll interval you entered in the 

Poll Interval

 

field above.

Stop

Click this button to halt the refreshing of the system statistics.

Table 63   

System Status: Show Statistics (continued)

LABEL

DESCRIPTION

Table 64   

DHCP Table

LABEL

DESCRIPTION

Host Name

This is the name of the host computer.

IP Address

This field displays the IP address relative to the 

Host Name 

field. 

MAC Address  This field displays the MAC (Media Access Control) address of the computer with the 

displayed host name.
Every Ethernet device has a unique MAC address. The MAC address is assigned at 

the factory and consists of six pairs of hexadecimal characters, for example, 

00:A0:C5:00:00:02.

Содержание P-660H Series



















































































































































































































































































































































































































































































Отзывы:

Нет отзывов