manualshive.com logo in svg

ZyXEL Communications P-660H Series, Руководство пользователя, Страница: 186 / 466

Поделиться
Скачать
ZyXEL Communications P-660H Series Скачать руководство пользователя страница 186

P-660H/HW-T Series User’ Guide

185

Chapter 16 Media Bandwidth Management Advanced Setup

16.5  Scheduler

The scheduler divides up an interface’s bandwidth among the bandwidth classes. The Prestige 
has two types of scheduler: fairness-based and priority-based. 

16.5.1  Priority-based Scheduler

With the priority-based scheduler, the Prestige forwards traffic from bandwidth classes 
according to the priorities that you assign to the bandwidth classes. The larger a bandwidth 
class’s priority number is, the higher the priority. Assign real-time applications (like those 
using audio or video) a higher priority number to provide smoother operation.

16.5.2  Fairness-based Scheduler

The Prestige divides bandwidth equally among bandwidth classes when using the fairness-
based scheduler; thus preventing one bandwidth class from using all of the interface’s 
bandwidth. 

16.6  Maximize Bandwidth Usage

The maximize bandwidth usage option (see 

Section 16.7.1 on page 187

) allows the Prestige to 

divide up any available bandwidth on the interface (including unallocated bandwidth and any 
allocated bandwidth that a class is not using) among the bandwidth classes that require more 
bandwidth. 

When you enable maximize bandwidth usage, the Prestige first makes sure that each 
bandwidth class gets up to its bandwidth allotment. Next, the Prestige divides up an interface’s 
available bandwidth (bandwidth that is unbudgeted or unused by the classes) depending on 
how many bandwidth classes require more bandwidth and on their priority levels. When only 
one class requires more bandwidth, the Prestige gives extra bandwidth to that class. 

When multiple classes require more bandwidth, the Prestige gives the highest priority classes 
the available bandwidth first (as much as they require, if there is enough available bandwidth), 
and then to lower priority classes if there is still bandwidth available. The Prestige distributes 
the available bandwidth equally among classes with the same priority level. 

16.6.1  Reserving Bandwidth for Non-Bandwidth Class Traffic

Do the following three steps to configure the Prestige to allow bandwidth for traffic that is not 
defined in a bandwidth filter.

1

Leave some of the interface’s bandwidth unbudgeted.

2

Do not enable the interface’s 

Maximize Bandwidth Usage

 option.

3

Do not enable bandwidth borrowing on the child-classes that have the root class as their 
parent (see 

Section 16.7 on page 187

).

Содержание P-660H Series



















































































































































































































































































































































































































































































Отзывы:

Нет отзывов