ZyXEL Communications P-2602HWLNI, Руководство пользователя, Страница: 73 / 496

Chapter 3 Internet and Wireless Setup Wizard
P-2602HWLNI User’s Guide
73
3 Configure your wireless settings in this screen. Click Next .
Figure 26 Wireless LAN
The following table describes the labels in this screen.
"
The wireless stations and ZyXEL Device must use the same SSID, channel ID
and WEP encryption key (if WEP is enabled), WPA-PSK (if WPA-PSK is
enabled) for wireless communication.
4
This screen varies depending on the security mode you selected in the previous screen.
Fill in the field (if available) and click
Next .
Table 12 Wireless LAN Setup Wizard 2
LABEL DESCRIPTION
Network
Name(SSID)
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless
LAN.
If you change this field on the ZyXEL Device, make sure all wireless stations use the
same SSID in order to access the network.
Channel
Selection
The range of radio frequencies used by IEEE 802.11b/g wireless devices is called a
channel. Select a channel ID that is not already in use by a neighboring device.
Security Select Automatically assign a WPA key (Recommended) to have the ZyXEL
Device create a pre-shared key (WPA-PSK) automatically only if your wireless clients
support WPA and OTIST. This option is available only when you enable OTIST in the
previous wizard screen.
Select
Manually assign a WPA-PSK key to configure a Pre-Shared Key (WPA-PSK).
Choose this option only if your wireless clients support WPA. See Section 3.3.1 on
page 74 for more information.
Select Manually assign a WEP key to configure a WEP Key. See Section 3.3.2 on
page 74 for more information.
Select Disable wireless security to have no wireless LAN security configured. Your
network is accessible to any wireless networking device that is within range.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.