ZyXEL Communications P-2601HN(L)-F1 Series, Руководство пользователя

Страница: 91 / 344

Chapter 6 Wireless
P-2601HN(L)-F1 Series User’s Guide
91
6.3 The More AP Screen
The ZyXEL Device can broadcast up to four wireless network names at the same
time. This means that users can connect to the ZyXEL Device using different
SSIDs. You can secure the connection on each SSID profile so that wireless clients
connecting to the ZyXEL Device using different SSIDs cannot communicate with
each other.
This screen allows you to enable and configure multiple Basic Service Sets (BSSs)
on the ZyXEL Device.
Click Network Settings > Wireless > More AP. The following screen displays.
Figure 23 Network Settings > Wireless > More AP
The following table describes the labels in this screen.
Group Key
Update Timer The Group Key Update Timer is the rate at which the RADIUS server
sends a new group key out to all clients.
Encryption If the security mode is WPA, the encryption mode is set to TKIP to
enable Temporal Key Integrity Protocol (TKIP) security on your
wireless network.
If the security mode is WPA2 and WPA Compatible is disabled, the
encryption mode is set to AES to enable Advanced Encryption System
(AES) security on your wireless network. AES provides superior
security to TKIP.
If the security mode is WPA2 and WPA Compatible is enabled, the
encryption mode is set to TKIPAES MIX to allow the wireless clients
to use either TKIP or AES.
Table 12 Wireless > General: More Secure: WPA(2) (continued)
LABEL DESCRIPTION
Table 13 Network Settings > Wireless > More AP
LABEL DESCRIPTION
# This is the index number of the entry.
Active This field indicates whether this SSID is active. A yellow bulb signifies
that this SSID is active. A gray bulb signifies that this SSID is not active.