ZyXEL Communications ONU-2024 Series, Руководство пользователя

Страница: 162 / 268

Chapter 21 IP Source Guard
ONU User’s Guide
162
21.3 IP Source Guard Static Binding
Use this screen to manage static bindings for ARP inspection. Static bindings are uniquely
identified by the MAC address and VLAN ID. Each MAC address and VLAN ID can only be
in one static binding. If you try to create a static binding with the same MAC address and
VLAN ID as an existing static binding, the new static binding replaces the original one. To
open this screen, click
Advanced Application > IP Source Guard > Static Binding .
Figure 81 IP Source Guard Static Binding
The following table describes the labels in this screen.
VID This field displays the source VLAN ID in the binding.
Port This field displays the port number in the binding. If this field is blank, the
binding applies to all ports.
Table 55 IP Source Guard (continued)
LABEL DESCRIPTION
Table 56 IP Source Guard Static Binding
LABEL DESCRIPTION
MAC Address Enter the source MAC address in the binding.
IP Address Enter the IP address assigned to the MAC address in the binding.
VLAN Enter the source VLAN ID in the binding.
Port Specify the port(s) in the binding. If this binding has one port, select the
first radio button and enter the port number in the field to the right. If this
binding applies to all ports, select
Any .
Add Click this to create the specified static binding or to update an existing one.
Cancel Click this to reset the values above based on the last selected static
binding or, if not applicable, to clear the fields above.
Clear Click this to clear the fields above.