ZyXEL Communications OMC-2301, Руководство пользователя

Страница: 166 / 224

Chapter 19 Introducing the Commands
OMC-2301 User’s Guide
166
19.10.5 epon-common Commands
The following table lists the
epon-common
commands in configuration mode. Use these
commands to configure general PON port settings.
<1-8> active
Enables this classifier rule.
<1-8> no active
Disable this classifier rule.
<1-8> value
ethertype:<0x0000-
0xFF0F>|ipv4:<1-
255>|port:<0-
65535>|<ip>
Sets the packet type to classify.
classifier
<ethertype|ipv4|src
-ip|dest-ip|src-
tcp-port|src-udp-
port>
Sets the filter type.
upstream-rule vlan <1-
8> action
<discard|pass>
Sets the action for the VLAN
type classifier rule.
<1-8> : Classifier rule index.
active
Enables this classifier rule.
no active
Disable this classifier rule.
value <1-4094>
Sets the VLAN ID of the traffic
to classify.
Table 51 classifier-filter-profile Commands (continued)
COMMAND DESCRIPTION
Table 52 epon-common Commands
COMMAND DESCRIPTION
epon-common
Enters the epon-common
mode.
dba-mode <plato>
Sets the DBA (Dynamic
Bandwidth Allocation) mode.
down-multicast-forward
01:80:C2:00:00:XX
<discard|pass>
Sets the action for downstream
multicast packets.
down-priority-to-queue
priority <0-7> queue <0-3>
Sets the IEEE 802.1p priority
queue mapping for the
downstream traffic.
end
Exits from the epon-common
mode.
exit
Exits from the configuration
mode.
igmp-last-member
Enables group leave
confirmation checks.
igmp-proxy
Enables IGMP proxy.
igmp-snooping
Enables IGMP snooping.
mac-aging-time <10-
86400>
Sets learned MAC aging time.