ZyXEL Communications OMC-2301, Руководство пользователя

Страница: 165 / 224

Chapter 19 Introducing the Commands
OMC-2301 User’s Guide
165
19.10.4 classifier-filter-profile Commands
The following table lists the
classifier-filter-profile
commands in configuration
mode. Use these commands to configure classification profiles.
Table 51 classifier-filter-profile Commands
COMMAND DESCRIPTION
classifier-
filter-profile
<name>
Sets a descriptive name for the
classification filter and enters
the classifier-filter-
profile mode.
active
Enables the classification filter.
downstream-def-vlan-
filter tag-frame
<discard|pass>
Sets the action for downstream
tagged frames.
untag-frame
<discard|pass>
Sets the action for downstream
untagged frames.
downstream-rule
<table1|table2> <1-8> action
<discard|pass>
Sets the action for the Ethernet
type classifier rule.
<1-8> : Classifier rule index.
<1-8> active
Enables this classifier rule.
<1-8> no active
Disable this classifier rule.
<1-8> value
ethertype:<0x0000-
0xFF0F>|ipv4:<1-
255>|port:<0-
65535>|<ip>
Sets the packet type to classify.
classifier
<ethertype|ipv4|src
-ip|dest-ip|src-
tcp-port|src-udp-
port>
Sets the filter type.
downstream-rule vlan
<1-8> action
<discard|pass>
Sets the action for the VLAN
type classifier rule.
<1-8> : Classifier rule index.
active
Enables this classifier rule.
no active
Disable this classifier rule.
value <1-4094>
Sets the VLAN ID of the traffic
to classify.
end
Exits from the classifier-filter-
profile mode.
exist
Exist from the configuration
mode.
no active
Disables this classifier profile.
upstream-def-vlan-
filter tag-frame
<discard|pass>
Sets the action for upstream
tagged frames.
untag-frame
<discard|pass>
Sets the action for upstream
untagged frames.
upstream-rule
<table1|table2> <1-8> action
<discard|pass>
Sets the action for the Ethernet
type classifier rule.
<1-8> : Classifier rule index.