ZyXEL Communications OLT-1308 Скачать руководство пользователя страница 74

Страница: 74 / 314

Chapter 7 Basic Setting

OLT-1308 Series User’s Guide

Figure 22

System Info

The following table describes the labels in this screen.

Table 12

System Info

LABEL

DESCRIPTION

System Name

This field displays the descriptive name of the OLT for identification purposes.

ZyNOS F/W

Version

(or F/W

Version)

This field displays the version number of the OLT 's current firmware including the

date created.

Ethernet

Address

This field refers to the Ethernet MAC (Media Access Control) address of the OLT.

Hardware Monitor

Temperature

Unit

The OLT has temperature sensors that are capable of detecting and reporting if the

temperature rises above the threshold. You may choose the temperature unit

(Centigrade or Fahrenheit) in this field.

Temperature

SWITCH

GPHY

and

SERDES

refer to the location of the temperature sensors on the

circuit board.

Current

This shows the current temperature in degrees centigrade at this sensor.

MAX

This field displays the maximum temperature measured at this sensor.

MIN

This field displays the minimum temperature measured at this sensor.

Threshold

This field displays the upper temperature limit at this sensor.

Status

This field displays

Normal

for temperatures below the threshold and

Error

for those

above.
If

Error

displays, check that the fans are working and make sure that you do not block

ventilation holes on the OLT.

Содержание OLT-1308



























































































































































































































































































































Результаты поиска

Содержание OLT-1308

Отзывы:

ZyXEL Communications OLT-1308, Руководство пользователя, Страница: 74 / 314

Результаты поиска

Содержание OLT-1308

Отзывы: