manualshive.com logo in svg

ZyXEL Communications OLT-1308, Руководство пользователя, Страница: 301 / 314

Поделиться
Скачать
ZyXEL Communications OLT-1308 Скачать руководство пользователя страница 301

 Appendix B Legal Information

OLT-1308 Series User’s Guide

301

condition. Any replacement will consist of a new or re-manufactured functionally equivalent 
product of equal or higher value, and will be solely at the discretion of ZyXEL. This warranty 
shall not apply if the product has been modified, misused, tampered with, damaged by an act 
of God, or subjected to abnormal working conditions.

Note

Repair or replacement, as provided under this warranty, is the exclusive remedy of the 
purchaser. This warranty is in lieu of all other warranties, express or implied, including any 
implied warranty of merchantability or fitness for a particular use or purpose. ZyXEL shall in 
no event be held liable for indirect or consequential damages of any kind to the purchaser.
To obtain the services of this warranty, contact ZyXEL's Service Center for your Return 
Material Authorization number (RMA). Products must be returned Postage Prepaid. It is 
recommended that the unit be insured when shipped. Any returned products without proof of 
purchase or those with an out-dated warranty will be repaired or replaced (at the discretion of 
ZyXEL) and the customer will be billed for parts and labor. All repaired or replaced products 
will be shipped by ZyXEL to the corresponding return address, Postage Paid. This warranty 
gives you specific legal rights, and you may also have other rights that vary from country to 
country.

Registration

Register your product online to receive e-mail notices of firmware upgrades and information 
at www.zyxel.com for global products, or at www.us.zyxel.com for North American products.

Содержание OLT-1308



























































































































































































































































































































Отзывы:

Нет отзывов