ZyXEL Communications OLT-1308, Руководство пользователя, Страница: 279 / 314

Chapter 38 Command Examples
OLT-1308 Series User’s Guide
279
where
This command backs up the current configuration file on a TFTP server. The following
example backs up the current configuration to a file (
test.cfg
) on the TFTP server
(
172.23.19.96
).
38.7.2 Restoring Configuration
Syntax:
copy tftp config <ip> <remote-file>
where
This command restores the configuration file on the OLT. The following example uploads the
configuration file (
test.cfg
) from the TFTP server (
172.23.19.96
) to the OLT.
"
When you use the
write memory
command without specifying a configuration
file index number, the OLT saves the changes to the configuration file the OLT
is currently using.
38.7.3 Resetting to the Factory Default
Follow the steps below to reset the OLT back to the factory defaults.
1
Enter
erase running config
to reset the current running configuration.
2 Enter
write memory
to save the changes to the current configuration file.
<ip> =
The IP address of a TFTP server on which you want to store the
backup configuration file.
<remote-file> =
Specifies the name of the configuration file.
sysname# copy running-config tftp 172.23.19.96 test.cfg
Backuping
. (683)Bytes Done!
sysname#
<ip> =
The IP address of a TFTP server from which you want to get the
backup configuration file.
<remote-file> =
Specified the name of the configuration file.
sysname# copy tftp config 172.23.19.96 test.cfg
Restoring
. (683)Bytes Done!
sysname#