manualshive.com logo in svg

ZyXEL Communications OLT-1308, Руководство пользователя, Страница: 237 / 314

Поделиться
Скачать
ZyXEL Communications OLT-1308 Скачать руководство пользователя страница 237

 Chapter 37 Introducing the Commands

OLT-1308 Series User’s Guide

237

37.2.3  Telnet 

Use the following steps to telnet into your OLT.

1

Connect your computer to the RJ-45 management port (labeled 

MGMT

) on the OLT.

2

Make sure your computer IP address and the OLT IP address are on the same subnet. In 
Windows, click 

Start

 (usually in the bottom left corner), 

Run

 and then type 

telnet 

192.168.0.1

 (the default management IP address) and click 

OK

.

3

A login screen displays (refer to 

Section 37.3 on page 238

). 

37.2.4  SSH

You can use an SSH client program to access the switch. The following figure shows an 
example using a text-based SSH client program. Refer to the documentation that comes with 
your SSH program for information on using it.  

C:\>ssh2 [email protected]
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@       WARNING: HOST IDENTIFICATION HAS CHANGED!         @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY!
Someone could be eavesdropping on you right now (man-in-the-middle attack)!
It is also possible that the host key has just been changed.
Please contact your system administrator.
Add correct host key to "C:/Documents and Settings/user/Application Data/
SSH/hostkeys/key_22_192.168.0.1.pub" to get rid of this message.
Received server key's fingerprint:
xupos-leruv-talir-cudeb-lybod-bubab-pyvub-mihod-gocat-tyfer-cixix
You can get a public key's fingerprint by running
% ssh-keygen -F publickey.pub
on the keyfile.
Agent forwarding is disabled to avoid attacks by corrupted servers.
X11 forwarding is disabled to avoid attacks by corrupted servers.
Are you sure you want to continue connecting (yes/no)? yes

Do you want to change the host key on disk (yes/no)? yes

Agent forwarding re-enabled.
X11 forwarding re-enabled.
Host key saved to C:/Documents and Settings/user/Application Data/SSH/
hostkeys/key_22_192.168.0.1.pub
host key for 192.168.0.1, accepted by user Thu Jul 20 2006 01:16:58
admin's password:
Authentication successful.
Copyright (c) 1994 - 2006 ZyXEL Communications Corp.
sysname>

Содержание OLT-1308



























































































































































































































































































































Отзывы:

Нет отзывов