ZyXEL Communications OLT-1308 Скачать руководство пользователя страница 199

Страница: 199 / 314

Chapter 29 Maintenance

OLT-1308 Series User’s Guide

199

29.10.2 FTP Command Line Procedure

Launch the FTP client on your computer.

Enter

open

, followed by a space and the IP address of your OLT.

Press

[ENTER]

when prompted for a username.

Enter your password as requested (the default is “1234”).

Enter

bin

to set transfer mode to binary.

Use

put

to transfer files from the computer to the OLT, for example,

put

firmware.bin ras

transfers the firmware on your computer (firmware.bin) to the

OLT and renames it to “ras”. Similarly,

put config.cfg config

transfers the

configuration file on your computer (config.cfg) to the OLT and renames it to “config”.
Likewise

get config config.cfg

transfers the configuration file on the OLT to your

computer and renames it to “config.cfg”. See

Table 69 on page 198

for more information

on filename conventions.

Enter

quit

to exit the ftp prompt.

29.10.3 GUI-based FTP Clients

The following table describes some of the commands that you may see in GUI-based FTP
clients.

29.10.4 FTP Restrictions

FTP will not work when:

• FTP service is disabled in the

Access Control

screen.

• The IP address(es) in the

Secured Client Set

in the

Remote Management

screen does not

match the client IP address. If it does not match, the OLT will disconnect the Telnet
session immediately.

General Commands for GUI-based FTP Clients

COMMAND

DESCRIPTION

Host Address

Enter the address of the host server.

Anonymous.
This is when a user I.D. and password is automatically supplied to the server

for anonymous access. Anonymous logins will work only if your ISP or service

administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.

Transfer Type

Transfer files in either ASCII (plain text format) or in binary mode.

Configuration and firmware files should be transferred in binary mode.

Initial Remote

Содержание OLT-1308



























































































































































































































































































































Результаты поиска

Содержание OLT-1308

Отзывы:

ZyXEL Communications OLT-1308, Руководство пользователя, Страница: 199 / 314

Результаты поиска

Содержание OLT-1308

Отзывы: