ZyXEL Communications OLT-1308 Скачать руководство пользователя страница 101

Страница: 101 / 314

Chapter 8 VLAN

OLT-1308 Series User’s Guide

101

• sent to a group whether it has a VLAN tag or not.
• blocked from a VLAN group regardless of its VLAN tag.

You can also tag all outgoing frames (that were previously untagged) from a port with the
specified VID. Refer to

Section 8.1 on page 97

for background information.

Figure 35

VLAN: Static VLAN

The following table describes the related labels in this screen.

Table 24

VLAN: Static VLAN

LABEL

DESCRIPTION

ACTIVE

Select this check box to activate the VLAN settings.

Name

Enter a descriptive name for the VLAN group for identification purposes.

VLAN Group ID

Enter the VLAN ID for this static VLAN; the valid range is between 1 and 4094.

Port

The port number identifies the port you are configuring.

Control

Select

Normal

for the port to dynamically join this VLAN group using GVRP. This is

the default selection.
Select

Fixed

for the port to be a permanent member of this VLAN group.

Select

Forbidden

if you want to prohibit the port from joining this VLAN group.

Tagging

Select

TX Tagging

if you want the port to tag all outgoing frames (that were

previously untagged) transmitted with this VLAN Group ID.

Add

Click

Add

to add the settings as a new entry in the summary table below.

Cancel

Click

Cancel

to reset the fields.

Clear

Click

Clear

to start configuring the screen again.

VID

This field displays the ID number of the VLAN group. Click the number to edit the

VLAN settings.

Содержание OLT-1308



























































































































































































































































































































Результаты поиска

Содержание OLT-1308

Отзывы:

ZyXEL Communications OLT-1308, Руководство пользователя, Страница: 101 / 314

Результаты поиска

Содержание OLT-1308

Отзывы: