ZyXEL Communications NWA50AX, Руководство пользователя, Страница: 150 / 266

Chapter 15 System
NWA50AX/NWA90AX/NWA55AXE Series User’s Guide
150
The Zyxel Device continues to use the following pre-defined list of NTP time servers if you do not specify a
time server or it cannot synchronize with the time server you specified.
When the Zyxel Device uses the pre-defined list of NTP time servers, it randomly selects one server and
tries to synchronize with it. If the synchronization fails, then the Zyxel Device goes through the rest of the
list in order from the first one tried until either it is successful or all the pre-defined NTP time servers have
been tried.
15.3.2 Time Server Synchronization
Click the Sync. Now button to get the time and date from the time server you specified in the Time
Server Address field.
When the Loading message appears, you may have to wait up to one minute.
Figure 97 Loading
The Current Time and Current Date fields will display the appropriate settings if the synchronization is
successful.
If the synchronization was not successful, a log displays in the View Log screen. Try re-configuring the
Date/Time screen.
To manually set the Zyxel Device date and time:
1
Click System > Date/Time .
2
Select Manual under Time and Date Setup .
3
Enter the Zyxel Device’s time in the New Time field.
4
Enter the Zyxel Device’s date in the New Date field.
5
Under Time Zone Setup , select your Time Zone from the list.
6
As an option you can select the Enable Daylight Saving check box to adjust the Zyxel Device clock for
daylight savings.
7
Click Apply .
To get the Zyxel Device date and time from a time server:
1
Click System > Date/Time .
2
Select Get from Time Server under Time and Date Setup .
Table 63 Default Time Servers
0.pool.ntp.org
1.pool.ntp.org
2.pool.ntp.org