ZyXEL Communications NWA1000 Series, Руководство пользователя, Страница: 85 / 263

Chapter 10 Wireless
NWA1000 Series User’s Guide
85
10.4 Load Balancing
Use this screen to configure wireless network traffic load balancing between the APs on your network.
Click
Configuration > Wireless > Load Balancing to access this screen.
Figure 51 Configuration > Wireless > Load Balancing
Each field is described in the following table.
Table 36 Configuration > Wireless > Load Balancing
LABEL DESCRIPTION
Enable Load
Balancing Select this to enable load balancing on the NWA1000 Series.
Use this section to configure wireless network traffic load balancing between the managed
APs in this group.
Mode Select a mode by which load balancing is carried out.
Select By Station Number to balance network traffic based on the number of specified
stations connected to the NWA1000 Series.
Select By Traffic Level to balance network traffic based on the volume generated by the
stations connected to the NWA1000 Series.
Select By Smart Classroom to balance network traffic based on the number of specified
stations connected to the NWA1000 Series. The NWA1000 Series ignores association request
and authentication request packets from any new station when the maximum number of
stations is reached.
If you select By Station Number or By Traffic Level , once the threshold is crossed (either the
maximum station numbers or with network traffic), the NWA1000 Series delays association
request and authentication request packets from any new station that attempts to make a
connection. This allows the station to automatically attempt to connect to another, less
burdened AP if one is available.
Max Station
Number
Enter the threshold number of stations at which the NWA1000 Series begins load balancing
its connections.
Traffic Level Select the threshold traffic level at which the NWA1000 Series begins load balancing its
connections (
Low , Medium , High ).
The maximum bandwidth allowed for each level is:
• Low - 11 Mbps,
• Medium - 23 Mbps
• High - 35M bps