![ZyXEL Communications nwa series Скачать руководство пользователя страница 30](http://html1.mh-extra.com/html/zyxel-communications/nwa-series/nwa-series_user-manual_945904030.webp)
Chapter 2 AP Management
NWA/WAC/WAX Series User’s Guide
30
C
HAPTER
2
AP Management
2.1 Management Mode
The Zyxel Device is a unified AP and can be managed by the NCC or an AP controller (AC), or work as a
standalone device. We recommend you use NCC to manage multiple APs (see the NCC User’s Guide).
An AP Controller, such as the ZyWALL ATP/VPN, USG FLEX, or NXC, can only manage multiple APs in the
same location.
Note: Not all models can be managed by NCC or an AC. See
check whether your product supports these.
The following table shows the default IP addresses and firmware upload methods for different
management modes.
When the Zyxel Device is in standalone mode and connects to a DHCP server, it uses the IP address
assigned by the DHCP server. Otherwise, the Zyxel Device uses the default static management IP
address (192.168.1.2). You can use the
NCC Discovery
or
AC Discovery
screen to allow the Zyxel Device
to be managed by the NCC or an AC, respectively.
When the Zyxel Device is managed by the NCC or an AC, it acts as a DHCP client and obtains an IP
address from the NCC/AC. It can be configured ONLY by the NCC/AC. To change the Zyxel Device
back to standalone mode, use the
Reset
button to restore the default configuration. Alternatively, you
need to check the NCC/AC for the Zyxel Device’s IP address and use FTP to upload the default
configuration file at conf/system-default.conf to the Zyxel Device and reboot the device.
Note: Not all models can be managed by NCC or an AC. See
check whether your product supports these.
2.1.1 Standalone
When working in standalone mode, the Zyxel Device is configured mainly with its built-in Web
Configurator. You can only connect to and set up one Zyxel Device at a time in this mode.
See
for detailed information about the standalone Web Configurator screens.
Table 6 Zyxel Device Management Mode Comparison
MANAGEMENT MODE
DEFAULT IP ADDRESS
UPLOAD FIRMWARE VIA
Nebula Control Center
Dynamic
NCC Portal
AP Controller
Dynamic
AP Controller using CAPWAP
Standalone
Dynamic or
Static (192.168.1.2)
Built-in Web Configurator
Содержание nwa series
