![ZyXEL Communications nwa series Скачать руководство пользователя страница 108](http://html1.mh-extra.com/html/zyxel-communications/nwa-series/nwa-series_user-manual_945904108.webp)
Chapter 9 Network
NWA/WAC/WAX Series User’s Guide
108
9.3 VLAN
This section discusses how to configure the Zyxel Device’s VLAN settings.
Note: Mis-configuring the management VLAN settings in your Zyxel Device can make it
inaccessible. If this happens, you will have to reset the Zyxel Device.
Enable Stateless
Address Auto-
configuration
(SLAAC)
Select this to enable IPv6 stateless auto-configuration on the Zyxel Device. The Zyxel Device
will generate an IPv6 address itself from a prefix obtained from an IPv6 router in the network.
Link-Local
Address
This displays the IPv6 link-local address and the network prefix that the Zyxel Device
generates itself for the LAN interface.
IPv6 Address/
Prefix Length
Enter the IPv6 address and the prefix length for the LAN interface if you want to use a static
IP address. This field is optional.
The prefix length indicates what the left-most part of the IP address is the same for all
computers in the network, that is, the network address.
Gateway
Enter the IPv6 address of the default outgoing gateway using colon (:) hexadecimal
notation.
Metric
Enter the priority of the gateway (if any) on the LAN interface. The Zyxel Device decides
which gateway to use based on this priority. The lower the number, the higher the priority. If
two or more gateways have the same priority, the Zyxel Device uses the one that was
configured first. Enter zero to set the metric to 1024 for IPv6.
DHCPv6 Client
Select this option to set the Zyxel Device to act as a DHCPv6 client.
DUID
This field displays the DHCP Unique IDentifier (DUID) of the Zyxel Device, which is unique and
used for identification purposes when the Zyxel Device is exchanging DHCPv6 messages
with others. See
for more information.
Request Address
Select this option to get an IPv6 address from the DHCPv6 server.
DHCPv6 Request
Options
Select this option to determine what additional information to get from the DHCPv6 server.
DNS Server
Select this option to obtain the IP address of the DNS server.
NTP Server
Select this option to obtain the IP address of the NTP server.
Apply
Click
Apply
to save your changes back to the Zyxel Device.
Reset
Click
Reset
to return the screen to its last-saved settings.
Table 39 Configuration > Network > IP Setting (continued)
LABEL
DESCRIPTION
Содержание nwa series
