ZyXEL Communications NWA-1100, Руководство пользователя

Страница: 193 / 225

Appendix H Text File Based Auto Configuration
ZyXEL NWA-1100 User’s Guide
193
Verifying Your Configuration File Upload Via SNMP
You can use SNMP management software to display the configuration file version
currently on the device by using the following MIB.
Troubleshooting Via SNMP
If you have any difficulties with the configuration file upload, you can try using the
following MIB 10 to 20 seconds after using SNMP to have the AP download the
configuration file.
Configuration File Format
The text based configuration file must use the following format.
Figure 104 Configuration File Format
The first line must be
!#ZYXEL PROWLAN.
The second line must specify the file version. The AP compares the file version
with the version of the last configuration file that it downloaded. If the version of
the downloaded file is the same or smaller (older), the AP ignores the file. If the
version of the downloaded file is larger (newer), the AP uses the file.
Configuration File Rules
You can only use the
wlan
and
wcfg
commands in the configuration file. The AP
ignores other ZyNOS commands but continues to check the next command.
Table 70 Displaying the File Version
ITEM OBJECT ID DESCRIPTION
pwCfgVersion 1.3.6.1.4.1.890.1.9.
1.2 This displays the current configuration file
version.
Table 71 Displaying the File Version
ITEM OBJECT ID DESCRIPTION
pwTftpOpStatu
s 1.3.6.1.4.1.890.1.9.
1.6 This displays the current operating status of the
TFTP client.
!#ZYXEL PROWLAN
!#VERSION 12
wcfg security 1 xxx
wcfg security save
wcfg ssid 1 xxx
wcfg ssid save