ZyXEL Communications NWA-1100, Руководство пользователя

Страница: 121 / 225

Chapter 13 Log Screens
ZyXEL NWA-1100 User’s Guide
121
13.7 Log Commands
Go to the command interpreter interface (refer to Appendix I on page 199 for the
Command Interpreter appendix explains how to access and use the commands).
13.7.1 Configuring What You Want the ZyXEL Device to Log
Use the
sys logs load
command to load the log setting buffer that allows you to configure
which logs the ZyXEL Device is to record.
Use
sys logs category
followed by a log category and a parameter to decide what to
record
Use the
sys logs save
command to store the settings in the ZyXEL Device (you must do
this in order to record logs).
13.7.2 Displaying Logs
Use the
sys logs display
command to show all of the logs in the ZyXEL Device’s log.
Use the
sys logs category display
command to show the log settings for all of the log
categories.
Use the
sys logs display [log category]
command to show the logs in an individual
ZyXEL Device log category.
Use the
sys logs clear
command to erase all of the ZyXEL Device’s logs.
13.7.3 Command List
The following table provides the commands that can be used for your ZyXEL
Device to configure the log settings.
Table 40 Log Command List
Table 39 Log Categories and Available Settings
LOG CATEGORIES AVAILABLE PARAMETERS
error 0, 1, 2, 3
mten 0, 1
Use
0
to not record logs for that category,
1
to record only logs for that category,
2
to
record only alerts for that category, and
3
to record both logs and alerts for that category.
KEYWORD DESCRIPTION
client
Enable SYSLOG client
ipaddr
SYSLOG server IP address
port
SYSLOG server port
Email server
E-mail server address
Email subject
E-mail subject
Email Address
E-mail address