ZyXEL Communications NWA-1100, Руководство пользователя

Страница: 104 / 225

Chapter 11 Remote Management
ZyXEL NWA-1100 User’s Guide
104
• You may only have one remote management session running at one time. The
ZyXEL Device automatically disconnects a remote management session of lower
priority when another remote management session of higher priority starts. The
priorities for the different types of remote management sessions are as follows:
1
Telnet
2
HTTP
System Timeout
There is a default system management idle timeout of five minutes (three
hundred seconds). The ZyXEL Device automatically logs you out if the
management session remains idle for longer than this timeout period. The
management session does not time out when a statistics screen is polling. You can
change the timeout period in the
SYSTEM screen.
11.4 The Telnet Screen
Use this screen to configure your ZyXEL Device for remote Telnet access. You can
use Telnet to access the ZyXEL Device’s Command Line Interface (CLI).
Click REMOTE MGNT > TELNET . The following screen displays.
Figure 50 Remote Management: Telnet
The following table describes the labels in this screen.
Table 29 Remote Management: Telnet
LABEL DESCRIPTION
TELNET
Server Port You can change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Server
Access
Select the interface(s) through which a computer may access the ZyXEL
Device using Telnet.