ZyXEL Communications NSA320, Руководство пользователя

Страница: 23 / 384

Chapter 2 NAS Starter Utility
Media Server User’s Guide
23
2.4 Main NAS Starter Utility Screen
The main NAS Starter Utility screen displays after you select an NSA in the NSA Seeker screen.
Figure 4
NAS Starter Utility Main Screen
The following table describes the labels in this screen.
Table 3
NAS Starter Utility Main Screen
LABEL DESCRIPTION
? Click this to display the utility help.
Configuration Click this to run the initialization wizard (see the utility help for details), configure system
settings (see
Section 2.8 on page 27 ), or go to the NSA’s Web Configurator login screen
(see Section 4.3 on page 43 ).
NAS Seeker Click this to use the NSA Seeker screen ( Section 2.3 on page 21 ) to find and connect to a
different NSA on your network.
Server Name This is the server name you configured for the NSA. If you have more than one NSA in
your network, it is recommended that you give each one a unique name for identification
purposes.
IP Address This is the current IP address of the NSA.
MAC Address This is the NSA’s unique physical hardware address (MAC).
Firmware Version This shows the version of firmware the NSA is currently using.
Status This shows whether the NSA is Online, Uninitialized, Unreachable, Configuring, or
Config Failed.
Run Initialization
Wizard This button displays if the NSA detects an installed hard disk that the NSA has not yet
configured. Click the button to run the initialization wizard (see the utility help for
details).