Chapter 7 WLAN & WWAN
NR2101 User’s Guide
65
Figure 66
SSID SETTINGS(2.4GHz)
The following table describes the labels in this screen.
Table 24 SSID SETTINGS (2.4GHz)
LABEL
DESCRIPTION
SSID SETTINGS (2.4GHz)
SSID Settings-2.4GHz
Click this button to configure the 2.4GHz SSID Settings on the NR2101.
WiFi Enable
Select this to enable or disable WiFi.
SSID
The SSID (Service Set IDentity) is the name of the WiFi network. WiFi clients use the
SSID to identify and connect to the NR2101. Enter a descriptive name (up to 32 ASCII
characters, including spaces and special characters) for the NR2101’s WiFi network.
Click the QR code icon(
) in the
SSID
field and scan the 2,4GHz QR code to join
the WiFi network.
Hide SSID
Select this check box to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
Password
Enter a password (of up to 8-64 characters including spaces and special characters)
the WiFi clients need to enter to connect to the WiFi network.
Security Type
Select
WPA-PSK
,
WPA2-PSK
or
WPA3/WPA2 mixed mode
to add a layer of security to
this WiFi network. The WiFi clients which want to connect to this network must have
the same WiFi security settings as the NR2101. See
for
detailed information on different security modes. Or you can select
None (Open)
to
allow any WiFi client device to connect to this network without authentication.
