manualshive.com logo in svg

ZyXEL Communications Network Device P-2302, Руководство пользователя, Страница: 41 / 359

Поделиться
Скачать
ZyXEL Communications Network Device P-2302 Скачать руководство пользователя страница 41

 Chapter 2 Introducing the Web Configurator

P-2302HWUDL-P1 Series User’s Guide

41

Figure 9   

Select Mode Screen

6

In the 

Options

 screen,

• Click 

Go to Wizard setup

 if you are logging in for the first time or if you want to make 

basic changes. See 

Chapter 3 on page 47

 for more information.

• Click 

Go to Advanced setup

 if you want to configure features that are not available in the 

wizards. The main screen appears. See 

Section 2.4 on page 42

 for more information.

• Click 

Exit

 if you want to log out.

"

For security reasons, the ZyXEL Device automatically logs you out if you do not 
use the web configurator for five minutes. If this happens, log in again.

2.3  Resetting the ZyXEL Device

Reset the ZyXEL Device in the following situations:

• You forgot your password.
• You cannot access the device using the web configurator. Check 

Troubleshooting

 in the 

Quick Start Guide

 to make sure you cannot access the device anymore.

If you reset the ZyXEL Device, you lose all of the changes you have made. The ZyXEL 
Device re-loads its default settings, and the password resets to “1234”. You have to make all 
of your changes again.

"

You will lose all of your changes when you push the RESET button.

To reset the ZyXEL Device,

Содержание Network Device P-2302








































































































































































































































































































































































Отзывы:

Нет отзывов