ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 313 / 1168

Chapter 9 Subscriber Port Setup Screens
Management Switch Card User’s Guide
313
9.34 VDSL2 PAEPVC
Click Port > VDSL2 PAEPVC in the navigation panel to open the screen shown next. Use this
screen to configure PAEVLAN settings for individual VDSL ports.
Figure 205
Port > VDSL2 PAEPVC
The following table describes the fields in this screen.
Table 147
Port > VDSL2 PAEPVC
LABEL DESCRIPTION
Slot Select the number of a line card’s slot. The corresponding subscriber port setup screen for the
type of line card you selected automatically displays.
Port Select the number of a DSL port on the line card.
Load Click Load to display the port’s settings in the fields below.
Index This is the number of a PAEPVC entry on this port.
VPI/VCI This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI), if any. The
VPI and VCI identify a channel on this port.
MUX This field displays the encapsulation type ( llc or vc ) for this channel.
PVID This field displays the service provider’s VLAN ID that this channel uses. The PVID here is the
service provider’s VLAN ID (the outer VLAN tag) that the line card assigns to untagged frames
received on this PVC.
Priority This field displays the service provider’s priority settings that this channel uses. Priority is the
IEEE 802.1p priority level for the service provider tag that the line card adds to untagged
frames that come in on this PVC. "0" is the lowest priority level and "7" is the highest.
Select Select an entry’s radio button and then click Modify to be able to edit it or click Delete to
remove it.
Modify Select a profile’s Select radio button and click Modify to edit the PAEPVC settings.
Copy Select a profile’s Select radio button and click Copy to copy the PAEPVC settings to another
port.
Delete Select a profile’s Select radio button and click Delete to remove the PAEPVC settings.
VPI/VCI Type the Virtual Path Identifier and Virtual Circuit Identifier for a channel on the IMA group. The
VPI and VCI identify a channel on this group.
PVID The PVID here refers to the service provider’s VLAN ID (the outer VLAN tag). Enter the service
provider ID (from 1 to 4094) for untagged frames received on this PAEPVC.
Note: Different PVCs can use the same service provider’s VLAN ID.