ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 259 / 1168

Chapter 9 Subscriber Port Setup Screens
Management Switch Card User’s Guide
259
9.12.1 PVC Setup Slot Screen
Click Port > PVC in the navigation panel to open the PVC Setup screen. Click an active ADSL or
SHDSL line card’s ID number to open the following screen. Use this screen to view and delete PVCs
from the line card’s DSL ports.
Figure 163
PVC Setup: Slot
The following table describes the fields in this screen.
ID This column lists the slot numbers of the line cards. Click the ID number of an active DSL line
card to go to a screen where you can view and delete PVCs from the line card’s DSL ports.
State This field displays the line card’s current operational status.
active means the line card is operating normally.
init means the MSC is initializing the line card.
disable means a manager has disabled the line card.
inactive means the line card is starting up or is not operating normally. This could be due to
the card starting, a firmware upgrade in progress or a malfunction. See Section 38.7 on page
1111 for what to do if the line card stays stuck in the inactive state.
Card Type This field displays the type of a line card.
Up Time This field displays how long the line card has been running since the last time it was started.
Firmware This field displays the current firmware version installed on the line card.
Table 114
PVC Setup (continued)
LABEL DESCRIPTION
Table 115
PVC Setup: Slot
LABEL DESCRIPTION
UP Click this to return to the previous screen.
Delete Click Delete to remove the selected PVC(s).
Index This is the number of the PVC. Click a number to open a screen where you can add the PVC to
more VLANs (or remove it from VLANs).
Port This is the number of a DSL port on the line card.
VPI/VCI This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). The VPI and
VCI identify a channel on this port.
Profile This field displays the ATM profile that this channel uses.
MUX This field displays the encapsulation type ( llc or vc ) for this channel.
Type This field shows that the channel is a PVC.
PVID This field displays the PVID (Port VLAN ID) to assign to untagged frames received on this channel.