manualshive.com logo in svg

ZyXEL Communications MES-3528 -, Руководство пользователя

Поделиться
Скачать
ZyXEL Communications MES-3528 - Скачать руководство пользователя страница 197

 Chapter 24 Multicast

MES-3528 User’s Guide

197

Normal Leave    Enter an IGMP normal leave timeout value (from 200 to 6,348,800) in 

miliseconds. Select this option to have the Switch use this timeout to 
update the forwarding table for the port. 

This defines how many seconds the Switch waits for an IGMP report 
before removing an IGMP snooping membership entry when an IGMP 
leave message is received on this port from a host.

Fast Leave

Enter an IGMP fast leave timeout value (from 200 to 6,348,800) in 
miliseconds. Select this option to have the Switch use this timeout to 
update the forwarding table for the port. 

This defines how many seconds the Switch waits for an IGMP report 
before removing an IGMP snooping membership entry when an IGMP 
leave message is received on this port from a host.

Group Limited

Select this option to limit the number of multicast groups this port is 
allowed to join.

Max Group 
Num.

Enter the number of multicast groups this port is allowed to join. 

Throttling 

IGMP throttling controls how the Switch deals with the IGMP reports 
when the maximum number of the IGMP groups a port can join is 
reached. 

Select Deny to drop any new IGMP join report received on this port 
until an existing multicast forwarding table entry is aged out.

Select Replace to replace an existing entry in the multicast forwarding 
table with the new IGMP report(s) received on this port.

IGMP Filtering 
Profile

Select the name of the IGMP filtering profile to use for this port. 
Otherwise, select Default to prohibit the port from joining any 
multicast group. 

You can create IGMP filtering profiles in the Multicast > Multicast 
Setting > IGMP Filtering Profile screen.

IGMP Querier 
Mode

The Switch treats an IGMP query port as being connected to an IGMP 
multicast router (or server). The Switch forwards IGMP join or leave 
packets to an IGMP query port. 

Select Auto to have the Switch use the port as an IGMP query port if 
the port receives IGMP query packets.

Select Fixed to have the Switch always use the port as an IGMP query 
port. Select this when you connect an IGMP multicast server to the 
port.

Select Edge to stop the Switch from using the port as an IGMP query 
port. The Switch will not keep any record of an IGMP router being 
connected to this port. The Switch does not forward IGMP join or leave 
packets to this port. 

Apply

Click Apply to save your changes to the Switch’s run-time memory. The 
Switch loses these changes if it is turned off or loses power, so use the 
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.

Cancel

Click Cancel to begin configuring this screen afresh.

Table 57   

Advanced Application > Multicast > Multicast Setting  (continued)

LABEL

DESCRIPTION

Содержание MES-3528 -













































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды