ZyXEL Communications MAX318M2W, Руководство пользователя, Страница: 53 / 294

Chapter 4 Tutorials
MAX318M2W User’s Guide
53
1
Select Enable Dynamic
DNS.
2
Select dyndns.org for the
service provider.
3
Select Dynamic for the
service type.
4
Type
mywimax.dyndns.org in
the Domain Name field.
5
Enter the user name
(UserName1) and
password (12345).
6
Select WAN IP for the IP update policy.
7
Click Save.
4.8.3 Testing the DDNS Setting
Now you should be able to access the WiMAX Device from the Internet. To test
this:
1
Open a web browser on the computer (using the IP address a.b.c.d) that is
connected to the Internet.
2
Type http://mywimax.dyndns.org and press [Enter].
3
The WiMAX Device’s login page should appear. You can then log into the WiMAX
Device and manage it.
4.9 Configuring Static Route for Routing to
Another Network
In order to extend your Intranet and control traffic flowing directions, you may
connect a router to the WiMAX Device’s LAN. The router may be used to separate
two department networks. This tutorial shows how to configure a static routing
rule for two network routings.
In the following figure, router R is connected to the WiMAX Device’s LAN. R
connects to two networks, N1 (192.168.1.x/24) and N2 (192.168.10.x/24). If