ZyXEL Communications MAX-306, Руководство пользователя, Страница: 170 / 405

Chapter 13 The Phone Screens
User’s Guide
170
13.4 Region
Click VOICE > Phone > Region to maintain settings that often depend on the
region of the world in which the WiMAX Device is located.
Figure 80 VOICE > Phone > Region
The following table describes the labels in this screen.
13.5 Technical Reference
The following section contains additional technical information about the WiMAX
Device features described in this chapter.
13.5.1 The Flash Key
Flashing means to press the hook for a short period of time (a few hundred
milliseconds) before releasing it. On newer telephones, there should be a "flash"
key (button) that generates the signal electronically. If the flash key is not
available, you can tap (press and immediately release) the hook by hand to
achieve the same effect. However, using the flash key is preferred since the
timing is much more precise. The WiMAX Device may interpret manual tapping as
hanging up if the duration is too long
Table 64 VOICE > Phone > Region
LABEL DESCRIPTION
Region Settings Select the place in which the WiMAX Device is located. Do not select
Default.
Call Service
Mode Select the mode for supplementary phone services (call hold, call
waiting, call transfer and three-way conference calls) that your VoIP
service provider supports.
• Europe Type - use supplementary phone services in European
mode
• USA Type - use supplementary phone services American mode
You might have to subscribe to these services to use them. Contact
your VoIP service provider.
Apply Click to save your changes.
Reset Click to restore your previously saved settings.