ZyXEL Communications MAX-306, Руководство пользователя, Страница: 121 / 405

Chapter 9 The VPN Transport Screens
User’s Guide
121
9.4 Ethernet Pseudowire
Because VPLS mimics a simple wired Ethernet connection to your service
provider’s router, the connection between the WiMAX Device and the peer device
is known as an “Ethernet pseudowire” or “PW”.
The Ethernet pseudowires use MPLS (MultiProtocol Label Switching) virtual circuit
labels to define the connection. In any such pseudowire, the ingress label on one
device must be the same as the egress label on the peer device, as shown in the
following figure. A is your WiMAX Device and B is your service provider’s router.
Figure 53 Ethernet Pseudowire Settings Example
Click ADVANCED > VPN Transport > Ethernet Pseudowire to configure the
WiMAX Device’s Ethernet pseudowires.
Figure 54 Advance > VPN Transport > Ethernet Pseudowire
DSCP If you wish to prioritize an interface, enter a DiffServ Code Point
value of six bits in binary notation. The higher the value, the higher
the interface’s priority on the WiMAX Device’s WiMAX link.
Interface
Description Enter a brief (up to 31 characters) name or description for this
interface.
Apply Click to save your changes.
Cancel Click to return to the previous screen without saving your changes.
Table 40 ADVANCED > VPN Transport > Customer Interface Setup (continued)
LABEL DESCRIPTION
INGRESS LABEL:
X
EGRESS LABEL:
Y
INGRESS LABEL:
Y
EGRESS LABEL:
X
PSEUDOWIRE
TO Y
TO X
A
B