ZyXEL Communications LTE7460-M608, Руководство пользователя

Страница: 20 / 124

Chapter 3 Tutorials
LTE7460-M608 User’s Guide
20
This tutorial uses the following example IP settings:
To configure a static route to route traffic from N1 to N2 :
1
Log into the LTE7460-M608’s Web Configurator.
2
Click Home Network > Static Route .
3
Click Add new in the Static Route screen.
4
Configure the Static Route Setup screen using the following settings:
4a
Type 192.168.10.2 and subnet mask 255.255.255.0 for the destination, N2.
4b
Type 192.168.1.253 (R’s N1 address) in the Gateway IP Address field.
4c
Click Add .
Now B should be able to receive traffic from A . You may need to additionally configure B ’s firewall
settings to allow specific traffic to pass through.
3.5 Access the LTE7460-M608 Using DDNS
If you connect your LTE7460-M608 to the Internet and it uses a dynamic WAN IP address, it is
inconvenient for you to manage the device from the Internet. The LTE7460-M608’s WAN IP address
changes dynamically. Dynamic DNS (DDNS) allows you to access the LTE7460-M608 using a domain
name.
To use this feature, you have to apply for DDNS service at www.dyndns.org.
This tutorial covers:
Table 4 IP Settings in this Tutorial
DEVICE / COMPUTER IP ADDRESS
The LTE7460-M608’s LAN 192.168.1.1
A 192.168.1.34
R’s N1 192.168.1.253
R’s N2 192.168.10.2
B 192.168.10.33