ZyXEL Communications LTE5366 Series, Руководство пользователя

Страница: 83 / 228

Chapter 7 Wireless LAN
LTE5366 Series User’s Guide
83
7.9 WPS Station Screen
Use this screen when you want to add a wireless station using WPS. To open this screen, click
Configuration > Network > Wireless LAN > WPS Station tab.
Note: After you click Push Button on this screen, you have to press a similar button in the
wireless station utility within 2 minutes. To add the second wireless station, you have to
press these buttons on both device and the wireless station again after the first 2
minutes.
Figure 48 Configuration > Network > Wireless LAN > WPS Station
Status This displays Configured when the LTE5366 has configured wireless security settings.
802.11 Mode This is the 802.11 mode used. Only compliant WLAN devices can associate with the LTE5366.
SSID This is the name of the wireless network (the LTE5366’s first SSID).
Security This is the type of wireless security employed by the network.
Release
Configuration Click this button to remove all configured wireless and wireless security settings for WPS
connections on the LTE5366.
Cancel Click Cancel to reload the previous configuration for this screen.
Apply Click Apply to save your changes back to the LTE5366.
Table 29 Configuration > Network > Wireless LAN > WPS (continued)
LABEL DESCRIPTION