ZyXEL Communications LTE3316-M604, Руководство пользователя

Страница: 81 / 193

Chapter 8 Wireless LAN
LTE3316 Series User’s Guide
81
8.6 Wireless LAN Advanced Settings
Use this screen to allow wireless advanced features, such as the output power, RTS/CTS Threshold
settings.
Click Configuration > Network > Wireless LAN > Advanced . The screen appears as shown.
Figure 35 Configuration > Network > Wireless LAN > Advanced
The following table describes the labels in this screen.
Table 24 Configuration > Network > Wireless LAN > Advanced
LABEL DESCRIPTION
Wireless Advanced Setup - 2.4G / Wireless Advanced Setup - 5G
RTS/CTS Threshold Data with its frame size larger than this value will perform the RTS (Request To Send)/ CTS
(Clear To Send) handshake.
This field is not configurable and the Zyxel Device automatically changes to use the maximum
value if you select 802.11n, 802.11gn or 802.11bgn in the
Wireless LAN > General screen.
Fragmentation
Threshold The threshold (number of bytes) for the fragmentation boundary for directed messages. It is
the maximum data fragment size that can be sent.
This field is not configurable and the Zyxel Device automatically changes to use the maximum
value if you select
802.11n , 802.11gn or 802.11bgn in the Wireless LAN > General screen.
Intra-BSS Traffic A Basic Service Set (BSS) exists when all communications between wireless clients or between
a wireless client and a wired network client go through one access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is enabled, wireless
clients can access the wired network and communicate with each other. When Intra-BSS is
disabled, wireless clients can still access the wired network but cannot communicate with
each other.