ZyXEL Communications LTE3316-M604, Руководство пользователя

Страница: 77 / 193

Chapter 8 Wireless LAN
LTE3316 Series User’s Guide
77
8.4 More AP
This screen allows you to enable and configure multiple wireless networks and guest wireless network
settings on the Zyxel Device.
You can configure up to four SSIDs to enable multiple BSSs (Basic Service Sets) on the Zyxel Device. This
allows you to use one access point to provide several BSSs simultaneously. You can then assign varying
security types to different SSIDs. Wireless clients can use different SSIDs to associate with the same access
point.
Click Configuration > Network > Wireless LAN > More AP . The following screen displays.
Figure 32 Configuration > Network > Wireless LAN > More AP
The following table describes the labels in this screen.
Encryption Select the encryption type of data encryption.
Select AES if your wireless clients can all use AES.
Select TKIP / AES to allow the wireless clients to use either TKIP or AES .
Group Key Update
Time The WPA Group Key Update Timer is the rate at which the AP (if using WPA-PSK key
management) or RADIUS server (if using WPA key management) sends a new group key
out to all clients. The re-keying process is the WPA equivalent of automatically changing
the WEP key for an AP and all stations in a WLAN on a periodic basis. Setting of the WPA
Group Key Update Timer is also supported in WPA-PSK mode. The default setting is 3600
seconds (60 minutes).
Apply Click Apply to save your changes back to the Zyxel Device.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 20 Configuration > Network > Wireless LAN > General: WPA / WPA2 (continued)
LABEL DESCRIPTION
Table 21 Configuration > Network > Wireless LAN > More AP
LABEL DESCRIPTION
# This is the index number of each SSID profile.
Status This shows whether the SSID profile is active (a yellow bulb) or not (a gray bulb).