ZyXEL Communications LTE3316-M604, Руководство пользователя

Страница: 62 / 193

Chapter 7 WAN
LTE3316 Series User’s Guide
62
7.6 IPv6
Use this screen to configure the Zyxel Device’s IPv6 settings. Click Configuration > Network > WAN > IPv6
from the Configuration menu.
Figure 25 Configuration > Network > WAN > IPv6
Scan Approach Select Auto to have the Zyxel Device connect to an available network using the default
settings on the SIM card. If the currently registered mobile network is not available or the
mobile network’s signal strength is too low, the Zyxel Device switches to another
available mobile network.
Select Manual to search for and select the mobile network(s) to which you want the Zyxel
Device to connect.
Network Provider List This table is available only when you set Scan Approach to Manual .
Click Scan to search for available mobile networks based on the network type you
selected.
Click Apply to save your changes in the Action field.
Provider Name This shows the name of the service provider.
Mobile System This shows the mobile telecommunications standard supported by the mobile network.
Network Status This shows whether the mobile network is available.
Action Click Select to have the Zyxel Device establish a connection to the selected mobile
network.
Cancel Click Cancel to reload the previous configuration for this screen.
Refresh Click Refresh to update this screen.
Apply Click Apply to save your changes back to the Zyxel Device.
Table 14 Configuration > Network > WAN > Network Scan (continued)
LABEL DESCRIPTION